Installation steps of LED lamp beads for piranha:

Firstly, select the piranha LED bracket, clean the bracket, fix the LED chip in the bracket bowl, confirm the shape, size, and depth of the concave bowl in the bracket, and then dry it. After drying, solder the two poles of the LED chip, and then select the corresponding mold particles based on the number of chips and the size of the light output angle. Fill the mold with glue, align the piranha bracket with the LED chip and insert it upside down into the mold. Put it into an oven for drying, demould, and then place it on the fascia cutting machine to cut it off. Then stop testing and sorting.

Precautions for installing LED lamp beads for piranha:

1. When packaging multiple chips on a piranha bracket, consideration should be given to the relevant thermal resistance, and the thermal resistance should be minimized as much as possible to extend the service life.

2. The piranha LED lamp beads have four legs, so when installing them, it is important to pay attention to which two legs are the positive pole and which two legs are the negative pole.

3. There are various shapes of LED lamp bead packaging molds for piranha, including φ 3mm round head and φ 5mm round head, also available in arc shape and flat head shape. According to the request for light angle, different packaging molds can be selected.